bibtex phd dissertation

• Future Students
• Parents and Families

College of Engineering

• Research and Facilities
• Departments

Guide to Writing Your Thesis in LaTeX

The bibliography and list of references.

The Graduate School requires a Bibliography which includes all the literature cited for the complete thesis or dissertation. Quoting from the Graduate School’s Guidelines for the Format of Theses and Dissertations :

“Every thesis in Standard Format must contain a Bibliography which lists all the sources used or consulted in writing the entire thesis and is placed at the very end of the work. The complete citations are arranged alphabetically by last name of the author. Individual citations are not numbered. No abbreviations in titles of published works will be accepted. The full title of a book, journal, website, proceedings, or any other published work must be italicized or underlined. Citations must follow standards set by the style manual that the student is using. The bibliography for URI theses is not broken into categories.”

The List of References is not required by the Graduate School, but is the style commonly used in Engineering, Mathematics, and many of the Sciences. It consists of a numbered list of the sources used or consulted in writing the thesis in the order that they are referenced in the text. There can be either one List of References for the entire thesis, or a List of References at the end of each chapter.

Both the Bibliography and the List of References will be generated by the urithesis LaTeX class. All you need to do is add information about your sources to the references.bib file, which is a database containing all of the necessary information about the references, then cite the reference in your thesis using the \cite{} command.

Generating the Bibliography and References

The bibliography and list of references are generated by running BibTeX. To generate the bibliography, load the file thesisbib.tex into your editor, then run BibTeX on it.

If each chapter has its own list of references, you will need to run BibTeX on each chapter to update its list of references. If there is one list of references for the whole thesis (because you used the oneref option, you will only need to run BibTeX on the top level file thesis.tex .

How to Add a Bibliography Entry

When we want to refer to a source in the thesis, we place an entry for that source in the file references.bib , then cite the source in the thesis with the \cite{LABEL} command. The syntax for an entry in the references.bib file is of the form:

ENTRYTYPE is the type of bibliographic entry such as Book , Article , or TechReport , that this entry describes. At the end of this page is a list of all possible entry types .

LABEL is a unique string that is used to refer to this entry in the body of the thesis when using the \cite{LABEL} command.

The FIELDNAMEn entries are the fields that describe this entry, (ie. author, title, pages, year, etc.). Each entry type has certain required fields and optional fields. See the list of all entry types for a description of the available fields.

As an example, suppose we have a paper from a conference proceedings that we want to cite. First we make an entry in the our references.bib file of the form:

We then cite this source in the text of our thesis with the command \cite{re:toolan:as03} . This will generate a Bibliography entry that looks something like:

and a List of References entry that looks something like:

Types of List of References

The Graduate School requires that the bibliography is always at the end of the thesis and sorted alphabetically by author, therefore there is no options that affect it. The list of references is optional, therefore there are a few different ways that it can created.

By default a separate list of references appears at the end of each chapter, and are sorted by the order that they are cited in that chapter. The option oneref (see options ) will create a single list of references for the whole thesis, which due to the requirements of the Graduate School, will appear after the last chapter and before any appendices.

The option aparefs will cite references using the APA style, which is the last name of the author and year of publication, such as (Toolan, 2006), instead of the default IEEE style, which is a number, such as [1]. This option will also sort the references alphabetically by author, instead of in order of citation. The options oneref and aparefs can be used together to create a single list of references using the APA style.

Supported Bibliography Entry Types

The following is a list of all the entry types that can be used. Click on the desired type to see a detailed description of how to use that type.

• Article – An article from a journal or magazine
• Book – A book with an explicit publisher
• InBook – A part of a book, such as a chapter or selected page(s)
• InCollection – A part of a book having its own title
• Booklet – Printed and bound works that are not formally published
• Manual – Technical documentation
• InProceedings – An article in a conference proceedings
• Proceedings – The entire proceedings of a conference
• MastersThesis – A Master’s thesis
• PhDThesis – A Ph.D. dissertation
• TechReport – A report published by a school or other institution
• Unpublished – A document that has not been formally published
• Electronic – An internet reference like a web page
• Patent – A patent or patent application
• Periodical – A magazine or journal
• Standard – Formally published standard
• Misc – For use when nothing else fits

Articles that have not yet been published can be handled as a misc type with a note. Sometimes it is desirable to put extra information into the month field such as the day, or additional months. This is accomplished by using the BIBTEX concatenation operator “#“:

Example .bib using this type:

Books may have authors, editors or both. Example .bib using this type:

Inbook is used to reference a part of a book, such as a chapter or selected page(s). The type field can be used to override the word chapter (for which IEEE uses the abbreviation “ch.”) when the book uses parts, sections, etc., instead of chapters

Incollection is used to reference part of a book having its own title. Like book , incollection supports the series, chapter and pages fields. Also, the type field can be used to override the word chapter.

Booklet is used for printed and bound works that are not formally published. A primary difference between booklet and unpublished is that the former is/was distributed by some means. Booklet is rarely used in bibliographies.

Technical documentation is handled by the manual entry type.

References of papers in conference proceedings are handled by the inproceedings or conference entry type. These two types are functionally identical and can be used interchangeably. Example .bib using this type:

It is rare to need to reference an entire conference proceedings, but, if necessary, the proceedings entry type can be used to do so.

Master’s (or minor) theses can be handled with the mastersthesis entry type. The optional type field can be used to override the words “Master’s thesis” if a different designation is desired:

The phdthesis entry type is used for Ph.D. dissertations (major theses). Like mastersthesis , the type field can be used to override the default designation. Example .bib using this type:

Techreport is used for technical reports. The optional type field can be used to override the default designation “Tech. Rep.” Example .bib using this type:

The unpublished entry type is used for documents that have not been formally published. IEEE typically just uses “unpublished” for the required note field.

The electronic entry type is for internet references. IEEE formats electronic references differently by not using italics or quotes and separating fields with periods rather than commas. Also, the date is enclosed within parentheses and is placed closer to the title. This is probably done to emphasize that electronic references may not remain valid on the rapidly changing internet. Note also the liberal use of the howpublished field to describe the form or category of the entries. The organization and address fields may also be used. Example .bib using this type:

The nationality field provides a means to handle patents from different countries

The nationality should be capitalized. The assignee and address (of the assignee) fields are not used, however, they are provided. The type field provides a way to override the “patent” description with other patent related descriptions such as “patent application” or “patent request”:

The periodical entry type is used for journals and magazines.

The standard entry type is used for formally published standards. Alternatively, the misc entry type, along with its howpublished field, can be used to create references of standards.

Misc is the most flexible type and can be used when none of the other entry types are applicable. The howpublished field can be used to describe what exactly (or in what form) the reference is (or appears as). Possible applications include technical-report-like entries that lack an institution, white papers and data sheets.

Additional Comments

Because we are effectively creating multiple bibliographies, (one for the actual bibliography, and one for each list of references), the two LATEX commands \bibliographystyle{} and \bibliography{} are not used. They have been redefined to do nothing, and the equivalent of these commands are done automatically when necessary.

When there is a reference that should be included in the bibliography, but does not need to be explicitly referenced in the thesis, use the \nocite{} command. This command works like the \cite{} command, except it does not put the citation in the list of references, only in the bibliography. The \nocite{} command must appear after the first \newchapter{} command, or it will be ignored.

When using the option aparefs , and a citation does not have an author, (such as often occurs with a web page), the key field can be used to specify what to use in the citation instead of the author’s name.

About the Bibliography Format

The bibliography format used by the urithesis class is based on the IEEE format. See the article “How to Use the IEEEtran BIBTEX Style” by Michael Shell for more details.

No Search Results

How to Write a Thesis in LaTeX (Part 4): Bibliographies with BibLaTeX

Part 1 | Part 2 | Part 3 | Part 4 | Part 5

Author: Josh Cassidy (August 2013)

This five-part series of articles uses a combination of video and textual descriptions to teach the basics of writing a thesis using LaTeX. These tutorials were first published on the original ShareLateX blog site during August 2013; consequently, today's editor interface (Overleaf) has changed considerably due to the development of ShareLaTeX and the subsequent merger of ShareLaTeX and Overleaf. However, much of the content is still relevant and teaches you some basic LaTeX—skills and expertise that will apply across all platforms.

In the previous post we looked at using images and tables in our thesis. In this post we are going to look at adding a bibliography to our thesis. To do this we are going to use the biblatex package . This involves creating a list of sources in a separate file called a .bib file.

The Bib File

When we create this file we need to choose a name for it and save it as a .bib file rather than a .tex file.

Now every time we need to reference a source we can cite it in the text and then fill in the source details in the .bib file. First we'll look at filling in our .bib file and then we'll move on to discussing citations. To add a new entry to our .bib file we need to first tell BibLaTeX what type of source we are referencing. We do this using an @ symbol followed immediately by the source type.

Then comes an opening curly bracket and a citation key of our choice followed by a comma. We then need to tell it all the details it wants for that particular type of source. We do this using a list of keywords each followed by an equals sign and the corresponding information in curly brackets. Items in the list are separated by commas. Each recognised source type has a list of required details which we must provide. But we'll often want to give more details. For example, for an article entry we need to use the author , title , journaltitle and year or date keywords. For an online source we need to use the author or editor , title , year or date and url keywords, and finally for a book it's the author , title and year or date keywords. Here's an example of what they might look like filled-in:

All of the information about the recognised source types and all the keywords you can use can be found in the biblatex documentation .

Now let's return to the main .tex file. To set it up for a bibliography we need to load up the biblatex package using the \usepackage command. Also in the preamble we need to specify which .bib files we want to use by calling the \addbibresource command and entering the file name in the curly brackets including the .bib extension.

Now let's look at citations. To cite a source in the text we use one of the biblatex citation commands. The simplest is the \cite command which prints the citation without any brackets unless you are using the numeric or alphabetic styles. We'll discuss styles a little later on. For example we may cite a source in the text like this:

Another one is the \parencite command which prints citations in parentheses except when using the numeric or alphabetic styles when it uses square brackets. There are more citation commands available to you which again can be found in the biblatex documentation .

The citation commands in biblatex also give us the option of adding a prenote and postnote in as arguments:

• a prenote is a word or phrase like "see" that is inserted at the start of the citation;
• a postnote is text you want inserted at the end of the citation.

To add these notes in you uses two sets of square brackets in the citation command. If you only open one set of square brackets it will assume the contents of the brackets is a postnote , so if you only want a prenote make sure you still open the second set of square brackets and then just leave them empty. Here are some examples:

Now to actually get the bibliography printed in our thesis we use the \printbibliography command at the end of the document. By default the bibliography and citations use the numeric style which looks like this:

To change the style we pass more arguments into the \usepackage command in square brackets. For example this specifies the alphabetic style:

Which looks like this:

And this is the authoryear style:

Another thing we can change here is the way the bibliography is ordered. For example this sorts entries by year , name , title :

While this doesn't sort them at all but displays them in the order they are cited.

More information about the numerous styles and sorting options available can be found in the biblatex documentation . This concludes our discussion on adding a bibliography. In the final post of this series we'll look at customising some of the opening pages.

All articles in this series

• Part 1: Basic Structure ;
• Part 2: Page Layout ;
• Part 3: Figures, Subfigures and Tables ;
• Part 4: Bibliographies with BibLaTeX ;
• Part 5: Customising Your Title Page and Abstract .
• Documentation Home
• Learn LaTeX in 30 minutes

Overleaf guides

• Creating a document in Overleaf
• Uploading a project
• Copying a project
• Creating a project from a template
• Using the Overleaf project menu
• Including images in Overleaf
• Exporting your work from Overleaf
• Working offline in Overleaf
• Using Track Changes in Overleaf
• Using bibliographies in Overleaf
• Sharing your work with others
• Using the History feature
• Debugging Compilation timeout errors
• How-to guides
• Guide to Overleaf’s premium features

LaTeX Basics

• Creating your first LaTeX document
• Choosing a LaTeX Compiler
• Paragraphs and new lines
• Bold, italics and underlining

Mathematics

• Mathematical expressions
• Subscripts and superscripts
• Brackets and Parentheses
• Fractions and Binomials
• Aligning equations
• Spacing in math mode
• Integrals, sums and limits
• Display style in math mode
• List of Greek letters and math symbols
• Mathematical fonts
• Using the Symbol Palette in Overleaf

Figures and tables

• Inserting Images
• Positioning Images and Tables
• Lists of Tables and Figures
• Drawing Diagrams Directly in LaTeX
• TikZ package

References and Citations

• Bibliography management with bibtex
• Bibliography management with natbib
• Bibliography management with biblatex
• Bibtex bibliography styles
• Natbib bibliography styles
• Natbib citation styles
• Biblatex bibliography styles
• Biblatex citation styles
• Multilingual typesetting on Overleaf using polyglossia and fontspec
• Multilingual typesetting on Overleaf using babel and fontspec
• International language support
• Quotations and quotation marks

Document structure

• Sections and chapters
• Table of contents
• Cross referencing sections, equations and floats
• Nomenclatures
• Management in a large project
• Multi-file LaTeX projects
• Lengths in L a T e X
• Headers and footers
• Page numbering
• Paragraph formatting
• Line breaks and blank spaces
• Text alignment
• Page size and margins
• Single sided and double sided documents
• Multiple columns
• Code listing
• Code Highlighting with minted
• Using colours in LaTeX
• Margin notes
• Font sizes, families, and styles
• Font typefaces
• Supporting modern fonts with X Ǝ L a T e X

Presentations

• Environments

Field specific

• Theorems and proofs
• Chemistry formulae
• Feynman diagrams
• Molecular orbital diagrams
• Chess notation
• Knitting patterns
• CircuiTikz package
• Pgfplots package
• Typesetting exams in LaTeX
• Attribute Value Matrices

Class files

• Understanding packages and class files
• List of packages and class files
• Writing your own package
• Writing your own class

Advanced TeX/LaTeX

• In-depth technical articles on TeX/LaTeX

Have you checked our knowledge base ?

Message sent! Our team will review it and reply by email.

• Plagiarism and grammar
• Citation guides

Cite a Thesis in BIBTEX

- powered by chegg.

Check your paper before your teacher does!

Avoid plagiarism — quickly check for missing citations and check for writing mistakes., is your source credible don’t forget to consider these factors., purpose : reason the source exists.

• Is the point of the information to inform, persuade, teach, or sell?
• Do the authors/publishers make their intentions clear?
• Does the information appear to be fact or opinion?
• Does the point of view seem impartial? Do they identify counter-arguments?

Authority - Author: Source of the information

• Who is the author? What are their credentials or qualifications?
• What makes the author qualified to write on this topic?
• Is there clearly defined contact information for the author?

Authority - Publisher: Source of the information

• Who is the publisher? Is it a non-profit, government agency, or organization? How might this affect their point of view?
• What makes the publisher qualified to generate works on this subject?
• What can the URL tell you about the publisher? For instance, .gov may signify that it is a government agency.

Relevance : Importance of the information to your topic

Currency : timeliness of the information.

• When was the information published? When was it last updated? Does it reflect the most current information available?
• How does your topic fit in with this source’s publication date? Do you need current information to make your point or do older sources work better?

Comprehensiveness

• Does the source present one or multiple viewpoints on your topic?
• Does the source present a large amount of information on the topic? Or is it short and focused?
• Are there any points you feel may have been left out, on purpose or accidentally, that affect its comprehensiveness?
• Citation Guides
• Chicago Style
• Terms of Use
• Global Privacy Policy
• Cookie Notice
• DO NOT SELL MY INFO

• NPS Dudley Knox Library
• Research Guides

Citation Guide

• BibTeX Code
• Examples & Rules
• Zotero Examples
• Examples & Rules
• BibTeX Code ≤ v2.6
• Other Styles
• Generative AI

  NPS Thesis Template v2.7 (rel. 3 April 2023): Code Examples (Using template version ≤  2.6? Click here:  IEEE  or  INFORMS )

The following codes are customized for NPS theses and are not intended for use with any other publisher or template. The NPS thesis LaTeX template comes prepackaged with a BibTeX tool and a bib file containing the examples below.

• << Previous: Zotero Examples
• Next: BibTeX Code ≤ v2.6 >>
• Last Updated: Apr 19, 2024 10:42 AM
• URL: https://libguides.nps.edu/citation

411 Dyer Rd. Bldg. 339 Monterey, CA 93943

Start Your Research

• Academic Writing
• Ask a Librarian
• Copyright at NPS
• Graduate Writing Center
• How to Cite
• Library Liaisons
• Research Tools
• Thesis Processing Office

Find & Download

• Databases List
• Articles, Books, & More
• NPS Faculty Publications: Calhoun
• Journal Titles
• Course Reserves

Use the Library

• My Accounts
• Request Article or Book
• Borrow, Renew, Return
• Remote Access
• Workshops & Tours
• For Faculty & Researchers
• For International Students
• Print, Copy, Scan, Fax
• Rooms & Study Spaces
• Computers & Software
• Adapters, Lockers & More

Collections

• NPS Archive: Calhoun
• Restricted Resources
• Special Collections & Archives
• Federal Depository
• Homeland Security Digital Library
• Library Staff
• Special Exhibits
• Our Affiliates

NPS-Licensed Resources - Terms & Conditions

Copyright Notice

Naval Postgraduate School 1 University Circle, Monterey, CA 93943 Driving Directions | Campus Map

This is an official U.S. Navy Website |  Please read our Privacy Policy Notice  |  FOIA  |  Section 508  |  No FEAR Act  |  Whistleblower Protection  |  Copyright and Accessibility  |  Contact Webmaster

• Plagiarism and grammar
• Citation guides

Cite a Dissertation in BIBTEX

Don't let plagiarism errors spoil your paper

Consider your source's credibility. ask these questions:, contributor/author.

• Has the author written several articles on the topic, and do they have the credentials to be an expert in their field?
• Can you contact them? Do they have social media profiles?
• Have other credible individuals referenced this source or author?
• Book: What have reviews said about it?
• What do you know about the publisher/sponsor? Are they well-respected?
• Do they take responsibility for the content? Are they selective about what they publish?
• Take a look at their other content. Do these other articles generally appear credible?
• Does the author or the organization have a bias? Does bias make sense in relation to your argument?
• Is the purpose of the content to inform, entertain, or to spread an agenda? Is there commercial intent?
• Are there ads?
• When was the source published or updated? Is there a date shown?
• Does the publication date make sense in relation to the information presented to your argument?
• Does the source even have a date?
• Was it reproduced? If so, from where?
• If it was reproduced, was it done so with permission? Copyright/disclaimer included?
• Citation Machine® Plus
• Citation Guides
• Chicago Style
• Harvard Referencing
• Terms of Use
• Global Privacy Policy
• Cookie Notice
• DO NOT SELL MY INFO

Preparing Your Ph.D. Dissertation Using LaTeX

Introduction, preparing the latex file, downloading the macros to your computer, steps for final submission.

Last updated 11 February 2012

BibTeX field: school

How to use the school field in bibtex.

The school field is used to store the name of the university or degree awarding institution where the thesis was written.

How the school field is used in BibTeX entry types

Guide to BibTeX Type MasterThesis

BibTeX is a reference management tool that is commonly used in LaTeX documents. The “masterthesis” BibTeX type is used for master’s theses. In this guide, we will explain the required and optional fields for the “masterthesis” BibTeX type.

Need a simple solution for managing your BibTeX entries? Explore CiteDrive!

• Web-based, modern reference management
• Collaborate and share with fellow researchers
• Integration with Overleaf
• Comprehensive BibTeX/BibLaTeX support
• Save articles and websites directly from your browser
• Search for new articles from a database of tens of millions of references

Required Fields

The “masterthesis” BibTeX type requires the following fields:

• author : The author of the thesis.
• title : The title of the thesis.
• school : The name of the institution that awarded the degree.
• year : The year the degree was awarded.

Optional Fields

In addition to the required fields, the “masterthesis” BibTeX type also has a number of optional fields that can be used to provide additional information. These fields include:

• type : The type of the thesis, such as “Master’s thesis”.
• address : The location of the institution.
• month : The month the thesis was submitted.
• note : Any additional information about the thesis.

Here is an example of how to use the “masterthesis” BibTeX type:

In this example, the BibTeX entry defines a master’s thesis authored by Jane Doe titled “A Study of Example”. The degree was awarded in 2022 by the University of Example, and the thesis was submitted in June in Example City, CA. The type of the thesis is specified as “Master’s thesis”, and a note is included that provides a URL for the thesis.